GM Futurliner Shifter
GM Futurliner Restoration Project
National Automotive and Truck Museum of the United States

HOME
Locating
History #10
Relocation
Resto Begins
Disassembly
Lots of Rust
Components
Sand Blasting
New Barn

Electrical
Engine
Transmission
Shifter
Hubcaps
Tires
Roof
Bumper
Body
Interior
Dash
Drive Shaft
Differential
Gas Tank
Brakes
Metalwork

Photos:
2012 - 2011
2010 - 2009
2008 - 2007
2006 - 2005
2004 - 2003
2002 - 2001
2000 - 1999
Status

Shifter MechanismThese three pictures are of the shifter. The first photo to the left shows the unrestored shifter and the middle one after it was repaired (without the knob) and primed. The picture to the left shows the completed and painted shifter box ready to go back in the Futurliner. It was finished February 2000 and will reside on the shelf until the cab has been refurbished.
Daena Vuyst Paints Cast LettersFUTURLINER HYDRAMATIC TRANSMISSION SHIFTER

    The automatic transmission shifter, which sits on the left side of the driver, has been completed. The final work that doesn't show up well in the picture above is the painting required on the raised aluminum cast letters. These are on the top of the shifter and indicate the gear selected. Daena Vuyst (Carols daughter) who has a much steadier hand at painting 3/16" X 1/4" letters than those of us who are working with 5 lb. hammers and 4-1/8" sockets completed the job. She did an outstanding job.
    The restoration of the Hydramatic transmission shifter consisted of fabricating a missing cover, a lot of cleaning, freeing up the rotating mechanism inside, sand blasting, repairing the shift stick, replacing the shift knob, priming, matching the original color, painting with the color coat, and then Daena's painting the raised letters.

HOW THE SHIFTER WORKS
    Let me describe this shifter. It sits on the left side of the Futurliner driver who sits in the center of the Futurliner cab. On the right of the driver is the stairs to the driver’s cockpit so the normal position of the shifter mechanism had to be placed to the left. The shift pattern is different than any other shift quadrant that I have ever seen. However, if you ever drove a GM military truck of the Korean War vintage you would recognize this shifter.* The shifter itself sits in a box that is 18" high that is a rectangle of 4" X 6". Above the shifter box the shift knob sticks up another 6" or is 24" off the floor.
    As you look down on the shifter the shift pattern is an upside down "U" with square corners. Confused yet? The right side of the upside down "U" controls LOW RANGE. Starting with the shift knob pulled back is R for Reverse. As you move the shift lever forward you come to F-1 corresponding also to HILLY. Push the shift lever further towards the front of the Futurliner and you come to F-2 corresponding to LEVEL. Pushing the lever all the way forward (top of the upside down U) and you are at N for neutral. Move the shift lever to the left and you are now in the HIGH RANGE. Since the shift lever is already at its furthermost point forward as you bring it back you travel through the selections in the reverse order starting with F-2, LEVEL then L-1, HILLY and finally R for reverse.

MECHANICAL OPERATION OF SHIFTER
    The shifter is controlling two transmissions the Hydramatic and the two speed gear box bolted to the rear of the Hydramatic. Although it appears complicated, it is really a simple arrangement. Inside the shifter box attached to the shifter knob stick is a connection point that a cable is attached that goes back to the Hydramatic. As the shifter knob is moved in just the forward and back direction, only the Hydramatic is shifted whether in LOW RANGE or HIGH RANGE.
    A second connection point is for a second cable. This second cable goes back to the two speed gear box on the back side of the Hydramatic. This cable is only moved when the gear selector knob is moved from right to left or from left to right. If you are not totally lost as the driver, the only time the selector can be moved in the right to left or vice-versa is in N or neutral. So, to go from high to low range you must stop. If you recall, that is when the selector is at the most forward position. Now as a Futurliner driver you can drive this thing or at least shift it. Also as the driver you better plan your day since you must be stopped to shift from high to low or vice versa.
    Although a lot of detail is given here it represents the entire restoration process and as one job is done that is another behind us. It also represents that there are many volunteers with skills that we appreciate and use.

Copyright 1999-2018. All rights reserved.